Micromod MOD: 30ML Functions Data Base Reference Manuel d'utilisateur télécharger pdf (Page 124)

MOD 30ML Functions

CONFIGURATION EXAMPLES

3.3.4 PID Display Configuration Procedure

The starting point of this procedure is the loop level of your strategy. The BASICPID

compound can be added to an existing strategy which was saved previously or it can be used

in a new strategy which has been initiated as described in Section 3.3.

To use the PID&DSP compound, set the TAG name in the DISP block (default is TAG-100)

and insert this name in the Tag List of the DIF block (up one level). The required state table

definitions are included in the block and also exist in the file “STATE.TXT”. If this block is

loaded in a new strategy, it will compile as is.

Display Interface Block Configuration Example

"TAG-100"; /* Example Loop 1 Display Tag */

Tune List Configuration Example

A tune list block is included in the BASICPID compound. This control tune list includes the

seven parameters identified below.

Control Tune List

Input Name Attribute State Table Limits Entry

1 PID TYPE CATYPE PidTypT None

2 ACTION ACTION PidActT Required

3 GAIN BGAIN 0.01 to 125 Required

4 RESET BRESET 0 to 125 RPM Required

5 PREACT BPREACT 0 to 32 MIN Required

6 SP LOLIM SPLL 0 to 100 Required

7 SP HILIM SPHL 0 to 100 Required

3-30

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 151 152

Pas de commentaire

Micromod MOD: 30ML Functions Data Base Reference Manuel d'utilisateur Page 124