Micromod Micro-PWC: 53PW6000 MicroPWC Installation and Setu Manuel d'utilisateur télécharger pdf (Page 25)

Micro-PWC™ Installation & Setup Guide

Installation 15

3.3 Determine I/O Address for Supervisor Board

Part of the Micro-PWC system installation procedure includes determining which I/O addresses have

already been assigned to other devices and functions and what I/O addresses are available. This informa-

tion will be necessary for installing a Supervisor Board. When installing a Supervisor Board, the I/O

address on this card must be set before it is installed. For this reason, you need to know what I/O

addresses are available when you are installing this board. Valid Supervisor Board I/O addresses are:

0x280, 0x290, 0x300, 0x310, 0x380, 0x390 and 0x3A0.

3.3.1 Windows 2000 Professional

1. Right-click on the My Computer icon on the Windows desktop. The following drop-down

menu will appear:

2. Select Manage > System Tools > System Information > Hardware Resources.

3. From the Computer Management dialog that appears, click I/O. The first set of four digits in

the Address column, as shown below, contains the physical I/O addresses that have already

been assigned to another function.

4. Find an unused I/O address for each Supervisor Board in the system. Valid Supervisor Board

I/O addresses are: 0x280, 0x290, 0x300, 0x310, 0x380, 0x390 and 0x3A0.

Figure 3-1. I/O Address List on Windows, Windows 2000 Professional

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

Pas de commentaire

Micromod Micro-PWC: 53PW6000 MicroPWC Installation and Setu Manuel d'utilisateur Page 25